Home

Shop

Express Order

Model #	Qty

Info

Contact

E-Mail Us

Account

Home
CLAMPS and VISES
Toolmaker Vises

Toolmaker Vises

Toolmaker's Screwless Vise
Click for a Bigger Picture
Toolmaker's Screwless Vises. All surface hardened and precision-ground to +/- .0002". Base and stationary jaw are one solid piece. Up to 400 lbs. pressure at 45° downward angle keeps work rigid. Quick adjustment is made by pulling pin and pushing sliding jaw forward, then tightening with an Allen wrench. All measuremants for these vises are approximate, and can vary slightly.
Quantity	Price	Model	Description	Width (nominal)	OAL	Height	JawOpens	Jaw Depth
	$99.00	VS-SLV2A	2" Toolmakers Screwless Vise	2"	5-1/2"	2 "	2-1/2"	1"
	$124.90	VS-SLV1	2 7/8" Toolmakers Screwless Vise	3"	7 1/2"	2 5/8"	4"	1 3/8"
	$219.00	VS-SLV3	3 7/8" Toolmakers Screwless Vise	4"	9 5/8"	3 1/2"	4 3/4"	1 3/4"

Toolmaker's Vise
Click for a Bigger Picture
Jaw width 2 3/8". Jaw depth 15/16" Jaw opening 2 3/16" Length 4 3/8", height 1 3/4" This Precision Toolmakers vise is made of hardened steel. All surfaces are precision ground with .0004" accuracy for flatness, squareness, and parallelism. "V" groove in jaws for holding round work.
Quantity	Price	Model	Description
	$79.20	VS-TV1	Toolmakers Vise, 2124-0022

Toolmaker's Insert Vise
Click for a Bigger Picture
Ideal for transferring small pieces from one machine to another without losing location. Base is hardened and precision ground parallel to .0001". Jaws are 15/16" wide x 3/8 deep with 13/16" opening. 2 1/2" overall length.
Quantity	Price	Model	Description
	$49.90	VS-INSERT	Toolmakers Insert Vise

Sine Vise
Click for a Bigger Picture
High precision toolmakers vise, hinged to a precision bottom plate. Hardened and ground. Square and parallel to .0002" 7 1/2" long, 3" wide. Jaw capacity is 3 3/4". Jaw depth is 1 1/4"
Quantity	Price	Model	Description
	$164.00	VS-SN3	3" Sine Vise

Home Alphabetical Index Site Map

drupal counter