Shop

Express Order

Model # Qty

Info

Contact

Account

Vee Blocks

Vee Blocks - Cast

Matched pairs. Made from quality castings. Machined for parallelism, squareness, center of 90° vee.
Quantity Price Model Description Width Height Thick Width of Vee

$21.95 VBL-3A
3" Cast Vee Blocks, Pair 3" 2 3/8" 1 1/4" 1 7/8"
Out of stock
 $28.20 VBL-4A
4" Cast Vee Blocks, Pair 4" 2 5/8" 1 5/8" 2 1/4"

$37.00 VBL-5A
5" Cast Vee Blocks, Pair 5" 3 1/8" 2" 2 1/2"
Out of stock
 $49.95 VBL-6A
6" Cast Vee Blocks, Pair 6" 3 1/2" 2 1/2" 3 1/4"

$84.50 VBL-7A
7" Cast Vee Blocks, Pair 7" 4 1/2" 3" 3 7/8"

$144.00 VBL-8A
8" Cast Vee Blocks, Pair 8" 5 1/2" 3 7/8" 4 3/8"

$299.00 VBL-10A
10" Cast Vee Blocks, Pair GTS:908-110 10" 6 7/16" 5" 4 5/8"

Stepped Vee Blocks with Clamp

Maximum round capacity is 2" diameter.
Hardened and ground within .0003".
Made of two matched blocks and two clamps.
Step groove construction permits use on its sides.
Dimensions 2 1/2" l x 2 3/4" w x 2" h.
Tapped holes permit mounting on plates.
Quantity Price Model Description

$78.90 VB-750
Stepped Vee Blocks, 1290-0070

Double Vee Block with Clamp

Maximum round capacity is 1 5/16".
Can be used on base, end, or either side.
Hardened and ground within .0003".
Thin V is handy for clamping shouldered studs, etc.
4 tapped holes 3/8-16 for clamping.
Forged clamp w/adjustable side screw for support.
Base is 1 7/8" sq. x 3 7/16" long.
Quantity Price Model Description

$46.20 VB-751
Double Vee Block, 1290-0065

V-Block and Clamp Sets

Hardened and ground steel. All sides are ground square and parallel to each other.

These vee blocks work vertically only.

Matched accuracy of the Hi-Precision models VB-505 and VB-510 is .0002".
Models VB-05, VB-1 and VB-2 are not held to the same tolerances.

90 degree V's are ground central, parallel, and square with the ends. Matched in pairs.
Hi-Precision models are made in Poland by Bison/TMX
Quantity Price Model Description Capacity Height Width Length

$27.60 VB-05
1" Cap V Block and Clamp Pair - 1-1/4 wide, 1290-0003 1" dia. 1 1/4" 1 1/4" 1 5/8"

$38.90 VB-1
1" Cap V Block and Clamp Pair - 1-5/8 wide, 1290-0005 1" dia. 1 3/8" 1 5/8" 1 3/4"

$47.25 VB-2
1-1/2" Cap V Block and Clamp Pair, 1290-0010 1 1/2" dia. 1 5/8" 1 3/4" 2 3/4"
Out of stock
 $95.60 VB-505
1" Cap Hi-Precision V Block and Clamp Pair 1" dia. 1 3/8" 1 5/8" 1 3/4"
Out of stock
 $129.60 VB-510
1-1/2" Cap Hi-Precision V Block and Clamp Pair 1 1/2" dia. 1 5/8" 1 3/4" 2 3/4"

V-Block and Clamp Sets - Horizontal and Vertical

Hardened and ground steel. All sides are ground square and parallel to each other.

VB-515, VB-520, and VB-3 are designed so the clamps do not protrude over the sides.
The vee block can be used on its sides as well as in an upright position.

Matched accuracy of Models VB-515 and VB-520 is .0002".
Model VB-3 is not held to the same tolerances.

90 degree V's are ground central, parallel, and square with the ends. Matched in pairs.
Hi-Precision models VB-515 and VB-520 are made in Poland by Bison/TMX
Quantity Price Model Description Capacity Size

$77.75 VB-3
1-1/2" Capacity V Block and Clamp Pair 1 1/2" dia. 1 3/4" x 2 1/2" x 2 3/4"
Out of stock
 $170.20 VB-515
1-1/2" Cap Precision V Block and Clamp Pair 1 1/2" dia. 1 3/4" x 2 1/2" x 2 3/4"

$422.00 VB-520
2-1/8" Cap Precision V Block and Clamp Pair 2 1/8" dia. 2 3/4" x 3 1/2" x 4 7/8"

Fowler X-Blox Vee Blocks

2 clamping blocks 1-1/2" x 1-1/4" x 1-1/4", with capacity appx. 1".
2 clamping blocks 2" x 1-1/2" x 1-1/2", with capacity appx. 1-1/2".
Square and parallel to .0005"
Includes case.
Quantity Price Model Description

$148.50 FOW-52-475-500
Fowler X-Blox

Vee Blocks with Swing-Away Clamp

Made of hardened tool steel in matched pairs.
Each block includes reversible, swing-away clamp.
Side slots allow easy clamping.
All sides are ground square and parallel within .0002"
Quantity Price Model Description Length & Width Height Max. Cap.
Out of stock
 $32.50 VB-301
1 3/8" Swing-Away Vee Blocks (pair), 1290-0040 1 3/8" 1 3/16" 19/32"

$88.00 VB-302
2 3/8" Swing-Away Vee Blocks (pair), 1290-0045 2 3/8" 2" 1 3/16"

$123.50 VB-303
4 1/8" Swing-Away Vee Blocks (pair), 1290-0050 4 1/8" 3 1/16" 2 9/16"

Magnetic V-Blocks (On-Off Type)

Precision ground finish. Powerful permanent magnet with on/off switch.
Quantity Price Model Description Width of Vee Length Width Height

$77.50 MGV-2
2" Magnetic V-Blocks, On-Off Type, 1971-0015 2" 4" 2 3/4" 3 3/4"

Bench Block

For holding work when driving pins, drilling, etc.
V-groove for holding round or odd-shaped work.
Hardened and ground with a smooth finish.
3" diameter, 1 1/2" height.
Holes vary in size from 1/8-5/8".
Quantity Price Model Description

$23.50 MAY-BB37
Bench Block, 1291-0120

Adjustable Angle Block

Adjustable Angle Block.
0 to 60° Adjustable Angle by locking the hex screw on the bottom.
Squareness: .0002"
Angle accuracy: +/- 10'
HRC: 50-55
4" Long x 1-7/8" High x 1-3/16" Wide
1 7/8" width of 90° Vee
Quantity Price Model Description

$64.50 ANG-BL60
Adjustable Angle Block, 2127-0020

Magnetic Chuck Vee Blocks

Integrally cast into one solid piece.
Ground all over.
1 7/8 high x 2 3/8 wide x 2" long.
Large V has 2" Capacity. Small V has 1/2" Capacity.

The USA model is made by Fisher Machine.

Please note that these tools are for use on magnetic chucks - these vee blocks are not magnetic by themselves.
Quantity Price Model Description Origin

$32.50 MG-VB1
Magnetic Chuck Vee Blocks Pair, Import, 1970-0035 Import

$72.50 MG-VB1-US
Magnetic Chuck Vee Blocks Pair, USA USA

Fowler X-Blox Jr Vee Blocks

Fowler X-Blox Jr.
Pair of hardened and ground blocks measuring 1 3/8" x 1 3/8" x 1 3/16".
Reversible swing-away clamps.
Set capacity is .030"- 1.285".
The set includes a mini-vee block for small parts.
In a fitted plastic case.
Quantity Price Model Description
Out of stock
 $129.00 FOW-52-475-025
Fowler X-Blox Jr

Home Alphabetical Index Site Map

Victor Machinery Exchange
12155 Stephens Road
Warren, MI 48089-3962

Phone: (800) 723-5359
Email, for all Information / Customer Service: sales@victornet.com