Quick Change Tool Holders- 100-400 Series
Wedge Type Quick Change Tool Post Sets |
|
|
Quick Change Tool Post Sets.
Wedge locking system.
All working parts hardened and ground.
These quality imported sets are compatible with Aloris and Dorian tooling.
Machineable bottom holding plate allows mating to variable compound slots.
Change tools in seconds. Place the toolholder on the toolpost's dovetail, adjust the tool's height with the knurled wheel, lock the nut, and lock the wedge. No shims necessary.
Each set includes:
one Tool Post
one Tool Holder style 1 (turning and facing)
one Tool Holder style 2 (turning, facing, and light boring)
one Tool Holder style 4 (boring)
one Tool Holder style 7 (parting/ cut-off)
one Tool Holder style 10 (knurling)
For the specs of the different style toolholders (1, 2, 4, 7, or 10) in each size series (100, 200, 300, or 400) see the additional category listings further below on this page.
To order the correct quick change lathe tool post for your machine, measure the CENTER HEIGHT of your lathe: this is the distance from the height of the top of the lathe's compound rest to the height of the spindle/chuck centerline.
Match your lathe's center height to a toolpost with a compatible center height range.
In situations where your lathe will accommodate more than one size tool post, secondary variables (such as swing, tool size capacity, rigidity, etc.) should then be considered to select the post that you want for your machine.
Check the individual listings of the different style toolholders below to see the capacities of each series.
|
|
Quantity
|
Price
|
Model
|
Description
|
Center Height |
Swing |
|
$260.00 | QC-100-ST
| 100 Quick Change Tool Post Set - Wedge ('AXA' sizing) 1643-0600 | 7/8"- 1 5/8" |
12" |
|
$310.00 | QC-200-ST
| 200 Quick Change Tool Post Set - Wedge ('BXA' sizing) 1643-0605 | 1 1/16"- 2 1/8" |
10"- 15" |
|
$450.00 | QC-300-ST
| 300 Quick Change Tool Post Set - Wedge ('CXA' sizing) 1643-0610 | 1 1/4"- 2 1/4" |
13"- 18" |
|
$579.00 | QC-400-ST
| 400 Quick Change Tool Post Set - Wedge ('CA' sizing) 1643-0615 | 1 9/16"- 2 3/4" |
14"- 20" |
Wedge Type Quick Change Tool Posts |
|
|
Quick Change Tool Posts.
Wedge locking system. All working parts hardened and ground.
These quality imported toolposts are compatible with Aloris and Dorian tooling.
Machineable bottom holding plate allows mating to variable compound slots.
Change tools in seconds. Place the toolholder on the toolpost's dovetail, adjust the tool's height with the knurled wheel, lock the nut, and lock the wedge. No shims necessary.
Use 100 series tool holders for 100 series tool posts, 200 series tool holders for 200 series tool posts,etc.
To order the correct quick change lathe tool post for your machine, measure the CENTER HEIGHT of your lathe: this is the distance from the height of the top of the lathe's compound rest to the height of the spindle/chuck centerline.
Match your lathe's center height to a toolpost with a compatible center height range.
In situations where your lathe will accommodate more than one size tool post, secondary variables (such as swing, tool size capacity, rigidity, etc.) should then be considered to select the post that you want for your machine.
Check the individual listings of the different style toolholders below to see the capacities of each series.
|
|
Quantity
|
Price
|
Model
|
Description
|
Center Height |
Swing |
|
$155.00 | QC-100-TP
| Quick Change Tool Post (Wedge) 12" Swing, 1643-0500 | 7/8"- 1 5/8" |
12" |
|
$180.00 | QC-200-TP
| Quick Change Tool Post (Wedge) 10"-15" Swing, 1643-0505 | 1 1/16"- 2 1/8" |
10"- 15" |
|
$245.00 | QC-300-TP
| Quick Change Tool Post (Wedge) 13"-18" Swing, 1643-0510 | 1 1/4"- 2 1/4" |
13"- 18" |
|
$325.00 | QC-400-TP
| Quick Change Tool Post (Wedge) 14"-20" Swing, 1643-0515 | 1 9/16"- 2 3/4" |
14"- 20" |
Style 2 Quick Change Tool Holders for Turning, Facing, and Boring |
|
|
Quick Change Tool Holders. Style 2 for turning, facing, and boring.
Style 2 holders are identical to Style 1 holders, with the addition of a milled V-groove for round-bar holding.
Use 100 series tool holders for 100 series tool posts, 200 series tool holders for 200 series tool posts,etc.
Style 2 tool holders do not include any tool bits or boring bars.
|
|
Quantity
|
Price
|
Model
|
Description
|
A |
C |
D |
Toolbit Sizes |
Shank Diameter |
|
$28.00 | QC-100-2
| # 2 Turn, Face, Bore Holder-100 Series, 1643-0045 | 15/16" |
7/16" |
1 1/2" |
3/16"- 1/2" |
7/16" |
|
$31.00 | QC-200-2
| # 2 Turn, Face, Bore Holder-200 Series, 1643-0050 | 1 1/8" |
1/2" |
1 3/4" |
1/4"- 5/8" |
1/2" |
|
$48.00 | QC-300-2
| # 2 Turn, Face, Bore Holder-300 Series, 1643-0055 | 1 7/16" |
5/8" |
2 1/8" |
1/2"- 3/4" |
3/4" |
|
$67.00 | QC-400-2
| # 2 Turn, Face, Bore Holder-400 Series, 1643-0060 | 1 11/16" |
3/4" |
2 1/2" |
1/2"- 1" |
13/16" |
|
