Tool Posts
Wedge Type Quick Change Tool Post Sets |
|
|
Quick Change Tool Post Sets.
Wedge locking system.
All working parts hardened and ground.
These quality imported sets are compatible with Aloris and Dorian tooling.
Machineable bottom holding plate allows mating to variable compound slots.
Change tools in seconds. Place the toolholder on the toolpost's dovetail, adjust the tool's height with the knurled wheel, lock the nut, and lock the wedge. No shims necessary.
Each set includes:
one Tool Post
one Tool Holder style 1 (turning and facing)
one Tool Holder style 2 (turning, facing, and light boring)
one Tool Holder style 4 (boring)
one Tool Holder style 7 (parting/ cut-off)
one Tool Holder style 10 (knurling)
For the specs of the different style toolholders (1, 2, 4, 7, or 10) in each size series (100, 200, 300, or 400) see the additional category listings further below on this page.
To order the correct quick change lathe tool post for your machine, measure the CENTER HEIGHT of your lathe: this is the distance from the height of the top of the lathe's compound rest to the height of the spindle/chuck centerline.
Match your lathe's center height to a toolpost with a compatible center height range.
In situations where your lathe will accommodate more than one size tool post, secondary variables (such as swing, tool size capacity, rigidity, etc.) should then be considered to select the post that you want for your machine.
Check the individual listings of the different style toolholders below to see the capacities of each series.
|
|
Quantity
|
Price
|
Model
|
Description
|
Center Height |
Swing |
|
$260.00 | QC-100-ST
| 100 Quick Change Tool Post Set - Wedge ('AXA' sizing) 1643-0600 | 7/8"- 1 5/8" |
12" |
|
$310.00 | QC-200-ST
| 200 Quick Change Tool Post Set - Wedge ('BXA' sizing) 1643-0605 | 1 1/16"- 2 1/8" |
10"- 15" |
|
$450.00 | QC-300-ST
| 300 Quick Change Tool Post Set - Wedge ('CXA' sizing) 1643-0610 | 1 1/4"- 2 1/4" |
13"- 18" |
|
$579.00 | QC-400-ST
| 400 Quick Change Tool Post Set - Wedge ('CA' sizing) 1643-0615 | 1 9/16"- 2 3/4" |
14"- 20" |
Phase II Micro Quick Change Tool System |
|
|
LIMITED QUANTITY!
Phase II Micro Quick Change Tool System.
Piston locking system.
This tool post is made to work on lathes with center heights from 9/32"- 23/32", and 5- 8 inches of swing.
The toolpost is fitted with a machinable T-slot nut to fit machines with a T-slotted compound rest. The toolpost may also be installed directly to a drilled-and-tapped (8 or 10mm) compound rest with either of the included bolts: an 8mm bolt (with included through-body bushing) or 10mm bolt. The tool post body is 1 1/4" high with a base 1 1/2" wide.
The complete set includes one tool post, one turning tool holder, one turning and boring tool holder, one boring bar holder, one cutoff tool holder, and one multi-tool holder.
Some machining is needed to adapt this post to the Prazi SD-400 and similar 7" swing machines.
To order the correct tool post for your machine, measure the CENTER HEIGHT of your lathe: this is the distance from the top of the compound to the center of the chuck. Match your lathe's center height to a toolpost with a compatible center height range. In situations where your lathe will accommodate more than one size tool post, secondary variables (such as swing, tool size capacity, rigidity, etc.) should then be considered to select the post that you want for your machine.
|
|
Quantity
|
Price
|
Model
|
Description
|
Center Height |
Holds Tool Size |
Out of stock
|
$34.00 | PH2-250-079
| #2 Turning and Boring Tool Holder | 9/32"- 23/32" |
1/8 - 3/8" toolbits or round bar |
Out of stock
|
$39.00 | PH2-250-081
| #4 Boring Bar Holder | 9/32"- 23/32" |
3/8" round bar |
Out of stock
|
$34.00 | PH2-250-083
| #6 Multi Tool Holder | 9/32"- 23/32" |
1/8 - 3/8" |
Out of stock
|
$40.00 | PH2-250-085
| #7 Cut-Off Tool Holder | 9/32"- 23/32" |
P1 or P1N cutoff blades |
Phase II Hobby Quick Change Tool System |
|
|
LIMITED QUANTITY!
Phase II Hobby Quick Change Tool System.
Piston locking system.
This tool post is made to work on lathes with center heights from 5/8"- 1 1/8", and 5- 8 inches of swing.
Designed to fit the popular 7" machines: 7 x 10", 7 x 12", and 7 x 14" mini lathes.
The toolpost is fitted with a machinable T-slot nut to fit machines with a T-slotted compound rest.
The toolpost may also be installed directly to a drilled-and-tapped (8 or 10mm) compound rest with either of the included bolts:
an 8mm bolt (with included through-body bushing) or 10mm bolt.
The tool post body is 1 1/2" high with a base 1 3/4" wide.
The complete set includes one tool post, two turning tool holders, a boring bar holder, and one cutoff tool holder.
To order the correct tool post for your machine, measure the CENTER HEIGHT of your lathe:
this is the distance from the top of the compound to the center of the chuck.
Match your lathe's center height to a toolpost with a compatible center height range.
In situations where your lathe will accommodate more than one size tool post, secondary variables (such as swing, tool size capacity, rigidity, etc.) should then be considered to select the post that you want for your machine.
|
|
Quantity
|
Price
|
Model
|
Description
|
Center Height |
Holds Tool Size |
Out of stock
|
$25.00 | PH2-250-069
| # 4 Hobby Boring Bar Holder | 5/8"- 1 1/8" |
3/8" round bar |
|
